Video Upgrades

Video Surveillance

Video Surveillance software downloads are large files. We have supplied them as Zipped files to minimize download time. To access any program, simply download and decompress the file with WinZip or a similar decompression utility. If you would like to download a free evaluation version of WinZip, please visit http://www.winzip.com/.


 
Most of these files are quite heavy, we therefore recommend you right-click the link and "save target as"

GE Navigator Software

GE Navigator Software (214MB) - GE Nav v3.1

GE Nav v3.1 represents the latest advancement in DVR management SW. This single application delivers centralized and remote video management capabilities combined with backwards compatibility to accommodate legacy and new DVRs & NVRs.

TVRmobile Software

TVRmobile Software (784 KB) - 1.0

TVRmobile represents the latest advancement in mobile DVR management SW. This single application delivers remote video management, while providing the ability to fully support TVR 10 with Phase II FW, TVR 40 and DVSR xU. It displays up to four video channels while also allowing an easy and intuitive PTZ - camera control via soft buttons.

Camera Firmware

Legend/Legend IP Firmware (1.0MB) - V3.69

Legend firmware version v3.69 is available for Legend and Legend IP. It corrects an issue with a corrupt log file causing a failure during the initialization process. In a small percentage of installations we have found that a corrupt log file can cause the Legend dome to become stuck in the boot process and fail to complete the initialization process. This issue is only present in Legend and Legend IP domes running firmware versions v2.19 and v3.17.

Digia II

DigiaII - 4, 9 & 16 Channel (12MB) - V1.0.87

This zip file contains 3 firmware upgrade files, one for each model of the Digia II, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need or all of them to the USB drive used to perform the flash upgrade. The Digia II model you are upgrading will select the correct flash upgrade file needed. If you have existing Digia II flash upgrade files on the PC or USB drive a message may be displayed asking if you want to overwrite the existing file. Select to overwrite them. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

NOTE: When the upgrade is complete you will need to cycle power to the Digia II in order for all changes to take affect.

Digia4 Generation I

Digi-4-160


Click here for the latest version of Client software (2.7MB) - V1.1.4

Click here for the latest version of firmware (2.86MB) - V1.2.32

DVSR xU

DVSR - 4, 8 & 16 Channel

This zip file contains the DVSR xU firmware upgrade file, one for all DVSR xU, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash to the USB drive used to perform the flash upgrade. If you have existing DVSR xU flash upgrade files on the PC or USB drive a message may be displayed asking if you want to overwrite the existing file. Select to overwrite them. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

NOTE: When the upgrade is complete you will need to cycle power to the DVSR and load Factory Defaults in order for all changes to take affect.

Click here for the latest version of DVSR Viewer Software
 (5.8MB) - V2.09

Click here for the latest version of DVSR-RT/K Firmware
 (2.97MB) - V2.24R

Click here for the latest version of French firmware (3.3MB) - V2.25F

Click here for the latest version of standard firmware (3.6MB) - V2.31S

WaveLet DVR

DVMRe-CT - 4, 10 & 16 Channel (4MB) - V5.69

This zip file contains 3 firmware upgrade files, one for each model of the DVMRe-CT, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need to the PC drive used to perform the flash upgrade. Read the document 0150-0200C Triplex Flash Procedure carefully and apply all required settings. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

DVMRe-Pro - 4, 10 & 16 Channel (4MB) - V5.69

This zip file contains 3 firmware upgrade files, one for each model of the DVMRe-Pro, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need to the PC drive used to perform the flash upgrade. Read the document 0150-0200C Triplex Flash Procedure carefully and apply all required settings. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

WaveJet DVR

DVMRe-CT II - 4, 10 & 16 Channel (4MB) - V6.29

This zip file contains 3 firmware upgrade files, one for each model of the DVMRe-CT, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need to the PC drive used to perform the flash upgrade. Read the document 0150-0200C Triplex Flash Procedure carefully and apply all required settings. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

StoreSafe-Pro II - 4, 10 & 16 Channel (4MB) - V6.29

This zip file contains 3 firmware upgrade files, one for each model of the StoreSafe-Pro II, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need to the PC drive used to perform the flash upgrade. Read the document 0150-0200C Triplex Flash Procedure carefully and apply all required settings. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

WaveReader SW

Wave Reader (31MB) - V4.2.47

WaveReader software is a graphical user interface that allows users to remotely access GE Security digital recorders via Ethernet or dial-up connection. This access includes remote viewing, menu adjustment, camera control and downloading of images for later use. WaveReader software is included as a CD with each new digital recording product sold.Use this free download to update your WaveReader to the latest version.

SplitWave (5.5MB) - V2.0

SplitWave is a stand-alone program that is designed to split large .60d files into smaller files.

SymSuite DVR

SymSafe 4, 8 &16 Channel (43.3MB) - V1.31B

This zip file contains 3 firmware upgrade files, one for each model of the SymSafe, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need or all of them to the USB drive used to perform the flash upgrade. The SymSafe model you are upgrading will select the correct flash upgrade file needed. If you have existing SymSafe flash upgrade files on the PC or USB drive a message may be displayed asking if you want to overwrite the existing file. Select to overwrite them. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

SymSafe Pro 4, 8 &16 Channel (43.3MB) - V1.31B

This zip file contains 3 firmware upgrade files, one for each model of the SymSafe Pro, probably a release notes pdf and a readme file. You need to extract these files to a PC. Once they are extracted you can then copy the flash file you need or all of them to the USB drive used to perform the flash upgrade. The SymSafe Pro model you are upgrading will select the correct flash upgrade file needed. If you have existing SymSafe Pro flash upgrade files on the PC or USB drive a message may be displayed asking if you want to overwrite the existing file. Select to overwrite them. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

SymDec 16+4 (14.4MB) - V1.52B

This is the latest upgrade for the SymDec 16 plus 4 digital recording device. This version has added support for the KTD-405 keypad controller. This zip file contains one firmware upgrade file, You need to extract this file to a PC. Once it is extracted you can then copy the flash file you need to the USB drive used to perform the flash upgrade. If you want to keep a history of flash files create a folder with the correct version name and move existing files to that folder before extracting or moving.

CAUTION: Please check the firmware version currently installed on your SymDec16Plus4. This can be found in the menu under "Info", then "System". If the version shown is 1.19L, download the version 1.25 firmware file below and upgrade with this version first. Once the upgrade to version 1.25 is complete you can upgrade to the latest version.


SymDec 16+4 (12.8MB) - V.1.25

VERSION 1.25 FIRMWARE

SymSuite SW

SymNav (98MB) - V1.90.010

SymNav software is a graphical user interface that allows users to remotely access GE Security SymSuite devices via Ethernet. This access includes remote viewing, SymDec menu adjustment, camera control and downloading of images for later use. SymNav software is included as a CD with each new SymSuite product sold. Use this free download for a complete installation or to update your SymNav Software to the latest version.

Matrix SW

KTD-411 Software (6.3 MB)

KTD-411 matrix switcher programming software.