Click to enlarge !

HID EntryProx Stand-Alone Reader, 0-20 cm Reading Range
Stand-Alone Reader 125 kHz

Providing single-door proximity access control, EntryProx¿ is ideal for small installations or remote locations when used in conjunction with an on-line system. This rugged, attractive unit can easily be modified to become an on-line reader by switching to a Wiegand output mode, allowing it to connect to any OEM controller. EntryProx¿ is compatible with all HID proximity cards and keytags.

Specifications

Typical maximum read range:  
ACT725, ACT736 ProxCard® II card: up to 7.6 cm
ACT786 ISOProx® II card: up to 6.35 cm
ACT745 ProxKey II keyfob: up to 3.8 cm
Dimensions (H x W x D): 133.3 x 698 x 41 mm
Material: Polycarbonate UL 94
Power supply: 10 - 15 VDC, reverse voltage protected
Current requirements: 150 mA @ 12 VDC
Operating temperature: -35 °C to +66 °C
Operating humidity: 5% to 95% relative humidity non-condensing
Transmit frequency: 125 kHz
Excite frequency: 125 kHz
Cable distance:  
Wiegand or clock and data interface: 152 m
Relay outputs: Strike relay - Form C, switches up to 1A @ 30 VDC
  Aux relay - Form C, switches up to 1A @ 30 VDC
Monitor inputs: Door position - N.O. dry contact
  Request to exit - N.O. dry contact
Sounder: 4000 Hz, defeatable
LEDs: Bi-colour (red/green), amber, infrared (use with optional palmtop printer)
Operation: Strike time: 1 - 99 seconds (adjustable)
  Strike mode: Access timer or toggle/latch
  Door ajar time: 10 - 990 Seconds (Adjustable)
Card programming: 26-bit format - batch enrollment
  OEM proprietary format - present card to enroll
Facility code processing:  
options (26-bit only): Check facility code and card ID
  Check facility code only (accept any ID#)
Requires a Wiegand interface (ACA 102):  
If connected to controller:  
Product Scope
  • Invalid PIN lockout - prevents unauthorized persons from gaining PIN code entry by trial and error
  • 12-Position keypad - for PIN entry or programming; the PIN keypad is functional in Wiegand mode
  • Single read mode - prevents anti-passback errors when the EntryProx is in Wiegand mode
  • Block delete - allows a sequential range of cards/keytags to be deleted from the EntryProx by user location
  • Detachable antenna module - can be mounted up to 10 feet away from the control unit, indoors or outdoors
Resources
Related Products/Accessories